HM-630

hm630.jpg
manford_hm630_02.jpg
manford_hm630_022.jpg
Specification
X TRAVEL:1,000 mm
Y TRAVEL:850 mm
Z TRAVEL:950 mm
SPINDLE CENTER TO TABLE SURFACE:100~950 mm
SPINDLE NOSE TO TABLE SURFACE:150~1,100 mm
CNC CONTROL:Fanuc/Mitsubishi/Siemens
Table
ABLE SURFACE TO FLOOR:1,300 mm
TABLE SIZE:630×630 mm
T-SLOT/BOLT SPEC.:24-M16 x P2.0
TABLE LOAD CAPACITY:1,200 kgs
INDEX PRECISION:1°
Spindle
SPINDLE TAPER:BT-50
SPINDLE SPEED:6,000 rpm
FEEDRATE
SPINDLE MOTER(CONT/30 MIN):15/18.5kw
3-AXES CUTTING FEEDRATE:1-10,000 mm/min
3-AXES RAPID FEEDRATE:30 m/min
3-AXES MIN. SETTING UNIT:0.001 mm
ATC
TOOLS:40 Tools
APC
NUMBER OF PALLETS:2 pcs
METHOD OF PALLET CHANGE:Rotary type
PALLET CHANGE TIME:16 sec
Specification
X TRAVEL:39.37 inch
Y TRAVEL:33.47 inch
Z TRAVEL:37.4 inch
SPINDLE CENTER TO TABLE SURFACE:3.94 ~ 37.4 inch
SPINDLE NOSE TO TABLE SURFACE :5.91 ~ 43.31 inch
CNC CONTROL:Fanuc/Mitsubishi/Siemens
Table
ABLE SURFACE TO FLOOR:51.18 inch
TABLE SIZE:24.8 X 24.8 inch
T-SLOT/BOLT SPEC.:24-M16 x P2.0
MAX. TABLE LOAD:2645.54 lbs
INDEX PRECISION:1°
SPINDLE
SPINDLE TAPER:BT-50
SPINDLE SPEED:6,000 rpm
FEEDRATE
SPINDLE MOTER(CONT/30 MIN):15/18.5kw
3-AXES CUTTING FEEDRATE:0.039-393.7 inch/min
3-AXES RAPID FEEDRATE:11.81 inch/min
3-AXES MIN. SETTING UNIT:0.000039 inch
ATC
TOOLS:40 Tools
APC
NUMBER OF PALLETS:2 pcs
METHOD OF PALLET CHANGE:Rotary type
PALLET CHANGE TIME:16 sec

Note: Specifications are subject to change without further notice.

  • X TRAVEL:630 mm/24.8 inch
    Y TRAVEL:630 mm/24.8 inch
    Z TRAVEL:630 mm/24.8 inch

    HM-400

  • X TRAVEL:800 mm/31.5 inch
    Y TRAVEL:725 mm/28.54 inch
    Z TRAVEL:725 mm/28.54 inch

    HM-500